Jilong KL-400 Ribbon Fiber Fusion Splicer

Jilong KL-400 Ribbon Fiber Fusion SplicerCore features● Internal charging● 18s splicing,25s heating● Electrodes life: 5000 times● 5.0"640x480 color LCD monitor● 36/ 48 / 72X Magnifcation● Average splicing loss: 0.01dBProduct Specification Splice Method : Active Clad-Alignment Applicable Fibers : SM(ITU-T G.652&G.657) / MM(ITU-T   G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) Compatible Fiber/Cable : Ribbon : 0.25~0.4 mm / Single : 250μm & 900μm Fiber Holder : Replaceable (Universal: FH-60) Fiber Diameter : Cladding: 80-150μm，Coating: 100~1000μm Fiber Cleave Length : 8~16 mm Splice mode : Max 128 modes Typical Splice Loss : SM: 0.03dB / MM: 0.01dB / DS: 0.04dB /   NZDS: 0.04dB / G.657: 0.03dB ★① Return Loss : >>60dB Splicing Time : Quick mode : 18 sec Estimated Splice Loss : Available Heating Time : Quick mode 25 sec Protection Sleeve Length 20mm, 30mm, 40mm, 50mm, 60mm Heat Programs: Max 32 modes Battery 7800mAh Battery Capacity, Typical 300   Cycles (Splice&Heat) per Charge ★② Electrode Life 5000 arcs, can be extended by using an   electrode grinder ★③ Auto-start : Splice / Heating Automatic Fiber Identification Support Automatic ARC Identification Automatic arc calibration by air pressure   and temperature Results Storage : The last 10,000 splice records and 2,000   result images Tension Test 1.96~2.25N Operating Condition Altitude: 0~5000m, 0~95% relative   humidity, -20~50°C, Max Wind 15m/s Storage Condition 0~95% relative humidity, -20~60°C Display 5” color high resolution (800 x 480)   display Fiber Magnification 36 / 48 / 72X Magnifcation Power Supply : AC 100-240V, DC 9-14V Terminal USB2.0 Weight 2.1kg without battery / 2.6kg with   battery Size 168H x 150W x 165D mm  ★①  With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.★②  Splice & Heat cycles may vary depending on the battery status and the operating environment. ★③  Electrode life may vary depending on the operating environment.