Cisco RV132W ADSL2 Wireless-N VPN Router

Description Objective The Cisco RV132W ADSL2 Wireless-N VPN Router offers great performance and is easy to set up, deploy, and use. This device can be used to connect to a regular Ethernet Wide Area Network (WAN) interface or to an Asymmetrical Digital Subscriber Line 2 plus (ADSL2 ) interface. It also supports Cisco FindIT Network Management, which allows you to manage supported Cisco devices, such as Cisco switches, routers, and wireless access points. To learn more about Cisco FindIT Network Management, click here. The RV132W is suited for small office home office (SOHO) and smaller deployments with Virtual Private Network (VPN) capabilities. This article aims to show the product specifications of the RV132W ADSL2 Wireless-N VPN Router. Note: To learn more about the RV132W Wireless-N VPN Router, click here. Product Specifications Specifications  Description Standards IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree), 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723) Physical Interfaces Ports LAN, WAN, USB, console Switch Power button (on, off) Buttons Reset, Wi-Fi (on, off) Cabling type Category 5e or better LEDs Power, DSL or WAN, Internet, LAN (ports 1-3), wireless, VPN, USB Operating system Linux Network Capabilities Network protocols Dynamic Host Configuration Protocol (DHCP) server Point-to-Point Protocol over Ethernet (PPPoE) Point-to-Point Tunneling Protocol (PPTP) DNS proxy DHCP relay agent Internet Group Management Protocol (IGMP) proxy and multicast forwarding Rapid Spanning Tree Protocol (RSTP) Dynamic Domain Name System (DynDNS, NOIP) Network Address Translation (NAT), Port Address Translation (PAT) One-to-one NAT Port management Port mirroring Software configurable DMZ to any LAN IP address Session Initiation Protocol (SIP) Application Layer Gateways (ALG) LAN 3 10/100 Mbps LAN ports with a managed switch WAN 1 10/100 Mbps FE WAN port WAN 1 ADSL2 WLAN Built-in high-speed 802.11n wireless access point Routing protocols Static routing Dynamic routing RIP v1 and v2 Inter-VLAN routing Network Address Translation (NAT) Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol VLAN support Port-based and 802.1Q tag-based VLANs Number of VLANs 6 active VLANs (2-4094 range) IPv6 Dual-stack IPv4 and IPv6 6rd Stateless address auto-configuration DHCPv6 server for IPv6 Clients on a LAN DHCPv6 client for WAN connectivity Internet Control Message Protocol (ICMP) v6 Static IPv6 routing Dynamic IPv6 routing with RIPng Network edge (DMZ) Software-configurable to any LAN IP address Layer 2 802.1Q-based VLANs, 6 active VLANs Security Firewall Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ DoS attacks prevented: SYN Flood Echo Storm ICMP Flood UDP Flood TCP Flood Block Java, cookies, active-X, HTTP proxy Access control IP access control lists; MAC-based wireless access control Content filtering Static URL blocking or keyword blocking Secure management HTTPS, username and password complexity Wi-Fi Protected Setup (WPS) WPS User privileges 2 levels of access: admin and guest QoS 802.1p port-based priority on LAN ports, application-based priority on WAN ports 4 queues Differentiated Services Code Point (DSCP) support Class of Service (CoS) Bandwidth management for service prioritization Performance NAT throughput 75 Mbps (Ethernet WAN) Concurrent sessions 2000 IPsec VPN throughput (3DES, AES) 3 Mbps Configuration Web user interface Simple, browser-based configuration (HTTP, HTTPS) Command-line interface (CLI) Command line using SSH Management Web user interface Simple, browser-based configuration (HTTP, HTTPS) CLI Command line using SSH Management protocols Web browser, Bonjour, Universal Plug and Play (UPnP) Event logging Local, syslog, email alerts Network diagnostics Ping, Traceroute, DNS lookup, and port mirror Upgradability Firmware-upgradable through a web browser, imported or exported configuration file System time Supports NTP, daylight savings, manual entry Languages GUI supports English Wireless Radio and modulation type 802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM WLAN 2.4 GHz IEEE 802.11n standard-based access point with 802.11b/g compatibility Operating channels 11 North America, 13 most of Europe, auto-channels selection Wireless isolation Wireless isolation between clients Internal antennas 2 Antenna gain in dBi 3 dBi Transmit power 802.11b: 17 dBm /- 2.5 dBm; 802.11g: 15 dBm /- 2.5 dBm; 802.11n: 15 dBm /- 2.5 dBm Receiver sensitivity -85 dBm at 11 Mbps, -73 dBm at 54 Mbps, -68 dBm at mcs15, HT20, -65 dBm at mcs15, HT40 Radio frequency Single-band, works on 2.4 GHz Active WLAN clients Supports up to 50 concurrent clients Multiple SSIDs Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks Wireless VLAN map Supports SSID to VLAN mapping with wireless client isolation WLAN security Wired Equivalent Privacy (WEP), WPA, WPA2-PSK, WPA2-ENT, 802.11i Wi-Fi Multimedia (WMM) WMM, WMM power save (WMM-PS) Environmental Power 12V 1A Certifications FCC, CE, IC, Wi-Fi Operating temperature 0° to 40°C (32° to 104°F) Storage temperature -20° to 70°C (-4° to 158°F) Operating humidity 10% to 85% non-condensing