Paradigm Seismic 110 Unlike many subwoofers on the market, Seismic™110 has no off-the-shelf parts. A completely custom build. Demonstrating how good it gets when form truly follows function. Within the interior of the Seismic 110’s cabinet,components and amplifier are purpose-designed and appointed to ensure the highest power and greatest level of reliability as well as stability from the smallest possible physical envelope. Ultra-low distortion split voice-coil design with an extremely long winding width allows for an incredible two inches of linear excursion with vanishing low levels of distortion. Shallow die-cast driver basket and two-piece flattened cone construction contribute to the compact footprint The fully integrated heat-dissipating Ultra-Class D™amplifier follows the shape of the cabinet maintaining the overall low profile. The amplifier is mounted directly to the amplifier plate to provide both EMI and shock protection.Preamp cover eliminates any possibility of air leaks. Unique Two-Part Cone Construction The low-profile cone geometry is achieved through a two-part construction. Using the principle of triangulation to lend maximum strength to a compact form factor, the cone is built in two sections: A support cone with I-beam cross-sectional support arms locks the flat outer cone to the voice-coil. The surround is then over molded to the outer edge which becomes an area of high strength when bonded to the outer cone. Features Innovative Ultra-Class-D™Amplifier with Switching Power Supply: More than 90% efficiency Prodigious total output: 1,700 watts of Dynamic Peak Power; 850 watts ofRMS Sustained Power. Big Power from a Compact Package Their low-noise,ultra-high-power, compact transformer (0.4 lb / 0.18 kg)boasts an ETD-core developed particularly for applications that require high power in a small format. The switched-mode power supply benefits from: highest quality MOSFET transistors, noise-suppression networks and an advanced control circuit. The result is tremendous current with ultra-quiet operation The Full-Bridge Ultra-Class-D™Design Output Stage:Operates from split power supply rails ensuring exceptionally low distortion. Not only does this design increase the speed of the switching, it dramatically increases switching efficiency Precision Components and Dual-Sided Military Spec (FR-4 rated) Glass/Epoxy Circuit Boards: Superior‘Reference’ quality performance with an enviable degree of reliability. Unique Temperature Sensors:Maintain a safe operating temperature, even under extreme operating conditions. Advanced Short-Circuit Protection: Should current through the MOSFETs exceed an internally preset limit, aSilicon Controlled Rectifier (SCR) disables the output stage. Essentially a ‘latching’ device, the SCR will not allow the output stage to be re-enabled until power is reset. Reaction time is typically within 10 μs Specifications; Paradigm Seismic 110 DESIGN Single high-excursion driver, sealed enclosure, patented built-in Ultra-Class-D™ power amplifier, USB port AMPLIFIER Power measurements underway to ensure compliance with new FTC regulations AMPLIFIER FEATURES Auto-On / Off, Trigger On / Off, soft clipping, electrical shorting protection, thermal protection ROOM CORRECTION Anthem Room Correction (ARC®) (sold separately) FREQUENCY RESPONSE ON-AXIS ±3 dB 17Hz – 250Hz LOW FREQUENCY DRIVER 254-mm (10 in) high-excursion mineral-filled co-polymer polypropylene cone with RCR™ resonance-control ribbing on underside, FEA-optimized overmolded, inverted Santoprene® surround, 38-mm (1-1/2 in) diameter split voice-coil construction (60-mm coil lengths), dual Nomex® spiders, high-temperature Apical™ formers, dual 12-mm-thick top plates, 10-lb (4.5 kg) triple ceramic (hard ferrite) magnet structure, AVS™ die-cast heatsink chassis SENSITIVITY ROOM / ANECHOIC 100 mV mono / LOW FREQUENCY EXTENSION 18 Hz (DIN) IMPEDANCE RCA: 10k ohms; XLR: 20k ohms LOW PASS FILTER FREQUENCY Variable 35 Hz – 150 Hz; Bypass Option SUB / SAT PHASE ALIGNMENT Variable 0° – 180° INPUTS RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp, processor or other line-level source WEIGHT 37 lbs. (16.8 kg) FINISHES Satin Black FacebookShare on XLinkedInWhatsAppEmailCopy Link
