Maiwo USB Type-C, Dual Bay HDD/NVMe M2 SSD 10Gbps Clone Converter For 2.5″ and 3.5″ SATA, Clone SATA to NVMe Instantly

Description MAIWO K10635N type C 10Gbps to dual bay HDD/NVMe M2 SSD clone converter for 2.5″ and 3.5″ SATA Key FeaturesScrew-less design easy to install HDD and SSDCompatible for different kinds of HDD/SSD in the market, including M-key NVMe SSD,2.5″ SATA HDD/SSD and 3.5″ SATA HDD, can recognize two disks simultaneously when connecting with PCSupport M-key NVMe SSD Offline clone, dual way, can copy 2.5″/3.5″ SATA => NVMe or NVMe => 2.5″/3.5″ SATA, switch to control source and target diskFour LED lights indicate clone progress 25%,50%,75% and 100% Interface: Type C to SATA/M-key M2Support SSD size: 2230,2242,2260 ,2280USB speed to 10Gbps maxSupport U.A.S.P, will improve speed 30% at win8 or above Compatible with windows, MAC and Linux Unit size:108 x 35 x 24 mm Perfect For System UpgradesEasily migrating an OS from an old SATA HDD to a modern, fast M.2 NVMe SSD. Data & Recovery BackupAccessing data from different drive types without needing multiple specialized adapters. Content CreationManaging large libraries of media files across different storage mediums at high speed. Clear Indicator Light Drive IndicatiorLight Flashes when read & write, light goes off when in sleep mode. Clone IndicatorLight flashes when cloning, light up when cloning is finished. Step 1Insert 2.5″/3.5″ SATA drive into the SATA Port, or insert M.2 NVMe SSD into the M2 port. Step 2Spin the silicone cork to fix the M.2 hard drive. Step 3Connect the adapter to your device via data cable. Step 4Connect the power adapter and open the power switch. Clone Operation Steps Step 1Choose the clone modeMake sure the capacity of the target drive is larger than or equal to the source driveConnect the power adapter, open the POWER switch, the power light, lights up and then the two Drive Indicators light up Step 2Long-press Clone button for 5 seconds and the Clone Indicator flashesPress Clone button within 5 seconds to enter clone modeCorresponding progress indicators start to flash when cloningIndicators are on once cloning is finished Note:You must remove the USB-C cable from the PC for the cloning process to work Box ContentsPackage Content:1 x adapter1 x cable1 x power adapter3 x screws1 x manual1 x warranty card Warranty1 Year