VersaPress – The Ultimate Shop Press (Pem/Brake/Dimple & More!)

Description The VersaPress is a patented and Made-in-USA* 20 ton shop press that can be customized to fit almost any shop’s demands. Featuring a 20-ton electric/hydraulic ram, this press can be run off a standalone 2HP pump, or you can use quick disconnect fittings to use the 2HP pump attached to your Rogue M600 series bender. Choose your control setup, base controls include auto-return feature, advanced controls include pressure control and provisions to add CNC press brake programming in the future, or start out with the full CNC setup that includes 25 programs for CNC press brake applications. Finally, choose whether you want to add on the press brake attachment and if you want our professional 5-way tooling (Press brake will ship before the end of 2024) Current Lead Time: 1-3 weeks  CNC controls and press brake (with US-Made and heat treated American precision tooling) will be available soon! This press table adjusts down to nearly ground level, allowing you to fit nearly anything inside the press work area. The hydraulic cylinder can mount in the center (As shown in our video), but it can also mount left and right for more versatility when pressing. This product ships unassembled via ground shipping. White glove assembly is available for an extra charge, assembled VersaPresses will ship via freight on a pallet. Tooling Options:   Our VersaPress tooling system is engineered for precise forming across a wide range of fabrication tasks. We offer Hemming, Gooseneck, and Acute tooling sets, each available in solid or segmented configurations. All tooling families support both air bending and coining, allowing operators to match the forming method to the required bend accuracy, material strength, and inside-radius requirements. Hemming ToolingHemming tooling is designed for creating closed hems, safety edges, and doubled material folds. The process begins with an initial air bend in the 30–60 degree included-angle range, depending on material thickness and the required hem profile. After the preliminary bend is formed, the material is flattened to close the hem. This tooling is ideal for reinforced edges, panel stiffening features, and cosmetic folds requiring uniform stack height and consistent closure. Gooseneck ToolingGooseneck tooling provides extended throat clearance, enabling operators to form return flanges, channels, and offset geometries without punch interference. It is commonly used for boxes, deep profiles, Z-shapes, and multi-stage bending sequences where a standard straight punch would collide with previously formed features. Its geometry makes it essential for complex bending operations with tight clearances. Acute ToolingAcute tooling is optimized for accurate bends with included angles below 90 degrees. It is well suited for producing stiffening ribs, tight brackets, precision components, and thin- to medium-gauge material forms where crisp internal angles and controlled springback are important. The narrow punch profile concentrates forming pressure, making it effective for both sharp air bends and fine coining applications. Solid vs. Segmented ToolingAll VersaPress tooling sets are offered in both solid and segmented configurations. Solid tooling is ideal for high-volume, repeatable production where bend lengths and profiles remain consistent. Segmented tooling provides far greater flexibility, allowing operators to remove or space sections to accommodate short flanges, internal tabs, relief cuts, notches, and irregular part geometry. For fabrication shops handling varied or custom work, segmented tooling minimizes setup restrictions and often eliminates the need for secondary trimming or rework. Machine dimensions: Height: 75″ total height, maximum 32 1/2″ internal height Width: 42 1/2″ total width with hydraulic pump mounted, 23″ internal width Depth: 24″ at the widest part Table pass-through Dimension: 22″x6″ pass-through section *MADE-IN-USA: We don’t claim this and just hope nobody asks us for details. These presses are designed, assembled, and tested in the USA. The entire frame is made from US-sourced steel plate, laser cut and CNC press brake formed right here in Oregon. The frame is then welded, machined, and powder coated here in Oregon as well. We machine and weld the stainless pins here. We build the entire wiring harness here in Oregon with made-in-the-USA UL listed 100% copper MTW wire. We can go on and on. We are passionate about true American manufacturing, and this is it! We import a few components, like the pedals (although the steel pedal base is made in the USA), some nuts and bolts (we use a US-military compliant mixed source that includes mostly import hardware and some US-made hardware), and some hydraulic components (less than 50% by weight of the hydraulics system). Most of our labels, stickers, and cardboad boxes are made in the USA as well, and our box suppliers are using US-made cardboard stock. We are ultra nosy and ask all our suppliers. Please read our terms and FAQ for complete information about warranty, returns, and more.